Internet streaming

Make sure your speakers are properly connected and the volume is at a reasonable level.

After clicking on LISTEN, please wait so that playback starts. This waiting time will be shorter or longer and will depend on your type of Internet connection, your computer and your operating system. The pages have been optimized for computers with Windows XP and Apple OS X (Internet Explorer, Firefox, Safari) and a broadband or DSL connection to a flow de1Mbits Download / s. If slower rate or less recent operating system, it will work but will sound much more time to be read and sometimes start with intermissions.

For a good listener files 5.1, you must have a 5.1 system with 5 speakers and a subwoofer, and a 5.1 surround sound card is properly installed and connected. The LFE channel should be set at 10 dB, this setting is available on V receiver.

For Windows users

- The application VLC player must be installed on your operating system. Download link: VLC Player

-Check the settings of Windows 5.1 surround

In the "Control Panel", click "Sounds and Audio Devices" tab then click the "Audio" and "advanced settings for audio playback" then verify that the configuration "speakers in 5.1 surround effect" is selected.

- To play files automatically. M3u, right click on the title LISTEN, save the file on the desktop. M3u. Right-click the file. M3u downloaded, select open with VLC player and select "always use this program to open this file type." VLC is now the default application that will open the m3u playlist files.

For users of Mac OS X

-Application VLC player must be installed on your operating system, you can use itune also compatible with the codec HEAACV2. Download link: VLC Player

-Check the settings of OS X 5.1 Surround

In the folder "Application", open the folder "Utilities", double click on "Audio MIDI Setup" then "Configure the loudspeakers," click on "Multichannel", right from the popup menu should appear "5.1 Surround" .

- M3u playlist files that we use to run the sound files should open with VLC. Why download one of these files on your Mac by right clicking on a photo which serve as links to the files. In the menu that appears, click "Download Linked File As ...". Save it on your desktop to find it easily. Then select the file and press [Command] - [I] on your keyboard, an information window opens. Within this window you will find "Open With" just below the drop down menu select the VLC application that will open the m3u file selected. If VLC does not appear in list at the bottom of it click "other" and find the folder where you saved VLC. When you have found and selected VLC, in the information window click the "Change All". VLC is now the default application that will open the m3u playlist files. Close the information window, playing with VLC is now operational.

For a good listener with a 5.1 surround system, you must follow some simple rules in speaker placement.

All speakers are placed on an imaginary circle whose center is the listening position. The front left and front right are positioned in an equilateral triangle of 60 ° and the rear speakers should be located the same distance from the

listening position, but at an angle between 100 ° and 120 °, as shown in the diagram.

Encoding files

The encoding used is the HeaacV2, 192 kbps, 48 ​​kHz, 5.1, 24 bit CBR.

Players tested

Windows file playback in 5.1 surround has been tested with VLC Player (version 1.1.5), Mac OS X file playback in 5.1 surround has been tested with VLC Player (version 1.1.5)